|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
|
END MILL HOLDERS HIGH BALANCED SERIES
|
|
|
|
|
|
|
|
 HIGH BALANCED STUB END MILL HOLDER
|
| EDP No. |
Type |
Taper No. |
d |
L |
D |
| AK206B25 | CAT 40-EMH1/2-1.75 | 40 | 0.500 | 1.75 | 1.25 |
| AK208B25 | CAT 40-EMH5/8-1.75 | 40 | 0.625 | 1.75 | 1.50 |
| AK210B25 | CAT 40-EMH3/4-1.75 | 40 | 0.750 | 1.75 | 1.75 |
| AK214B25 | CAT 40-EMH 1" -1.75 | 40 | 1.000 | 1.75 | 1.75 |
| AK217B25 | CAT 40-EMH1*1/4-2.00 | 40 | 1.250 | 2.00 | 2.25 |
| HIGH BALANCED STANDARD END MILL HOLDER
|
| EDP No. |
Type |
Taper No. |
d |
L |
D |
| AK000B25 | CAT 40-EMH1/8-2.50 | 40 | 0.125 | 2.50 | 0.69 |
| AK001B25 | CAT 40-EMH3/16-2.50 | 40 | 0.187 | 2.50 | 0.69 |
| AK002B25 | CAT 40-EMH1/4-2.50 | 40 | 0.250 | 2.50 | 0.78 |
| AK003B25 | CAT 40-EMH5/16-2.50 | 40 | 0.312 | 2.50 | 0.88 |
| AK004B25 | CAT 40-EMH3/8-2.50 | 40 | 0.375 | 2.50 | 1.00 |
| AK005B25 | CAT 40-EMH7/16-2.50 | 40 | 0.437 | 2.50 | 1.13 |
| AK006B25 | CAT 40-EMH1/2-2.63 | 40 | 0.500 | 2.63 | 1.25 |
| AK008B25 | CAT 40-EMH5/8-3.75 | 40 | 0.625 | 3.75 | 1.50 |
| AK010B25 | CAT 40-EMH3/4-3.75 | 40 | 0.750 | 3.75 | 1.75 |
| AK012B25 | CAT 40-EMH7/8-4.00 | 40 | 0.875 | 4.00 | 1.88 |
| AK014B25 | CAT 40-EMH 1"-4.00 | 40 | 1.000 | 4.00 | 2.00 |
| AK017B25 | CAT 40-EMH1*1/4-4.25 | 40 | 1.250 | 4.25 | 2.50 |
| AK021B25 | CAT 40-EMH1*1/2-4.63 | 40 | 1.500 | 4.63 | 2.50 |
| HIGH BALANCED EXTENDED END MILL HOLDER
|
| EDP No. |
Type |
Taper No. |
d |
L |
D |
| AK104B25 | CAT 40-EMH3/8-4.50 | 40 | 0.375 | 4.50 | 1.00 |
| AK106B25 | CAT 40-EMH1/2-4.63 | 40 | 0.500 | 4.63 | 1.25 |
| AK108B25 | CAT 40-EMH5/8-5.75 | 40 | 0.625 | 5.75 | 1.50 |
| AK110B25 | CAT 40-EMH3/4-5.75 | 40 | 0.750 | 5.75 | 1.75 |
| AK112B25 | CAT 40-EMH7/8-6.00 | 40 | 0.875 | 6.00 | 1.88 |
| AK114B25 | CAT 40-EMH 1"-6.00 | 40 | 1.000 | 6.00 | 2.00 |
| AK117B25 | CAT 40-EMH1*1/4-6.25 | 40 | 1.250 | 6.25 | 2.50 |
| AK121B25 | CAT 40-EMH1*1/2-6.63 | 40 | 1.500 | 6.63 | 2.50 |
|
|
 |
|
